RoHS directive: what it is, restricted substances and importer obligations
FRIDAY, 20 NOVEMBER 2026
Lead, cadmium, mercury and seven other substances are banned above 0.1% (0.01% for cadmium) in every electrical product sold in the EU, USB and LED gadgets included: what importers must check and what they risk.
The RoHS directive, Directive 2011/65/EU, bans ten hazardous substances in electrical and electronic equipment sold in the European Union: lead, mercury, cadmium, hexavalent chromium, two brominated flame retardants and four phthalates. Anyone importing a product with a plug, a battery or a circuit from outside the EU is personally responsible for compliance, with fines in Italy of up to 100,000 euros.
RoHS directive: what it is and where it comes from
RoHS stands for Restriction of Hazardous Substances. The first version, Directive 2002/95/EC, applied from 1 July 2006 to a closed list of products. The current Directive 2011/65/EU, often called RoHS 2, widened the rules and tied them to CE marking. Delegated Directive (EU) 2015/863, sometimes called RoHS 3, added four phthalates to the list from 22 July 2019.
In Italy the directive is transposed by Legislative Decree no. 27 of 4 March 2014, in force since 30 March 2014 and last updated in June 2026. The aim is twofold: to protect the health of users and to make the recovery and disposal of electronic waste safer. This is why RoHS works alongside the WEEE rules on waste, which however cover collection and recycling, not what the product is made of.
Which products are covered
The directive applies to equipment that needs electric current or electromagnetic fields to perform at least one of its functions, with a voltage of up to 1,000 volts AC and 1,500 volts DC. Annex I divides it into 11 categories: large and small household appliances, IT and telecoms, consumer equipment, lighting, electrical tools, toys, leisure and sports equipment, medical devices, monitoring and control instruments, automatic dispensers and finally category 11, "other EEE".
Category 11 is the one that matters most for buyers sourcing in Asia: since 22 July 2019 it covers everything that used to fall outside. A keyring with an LED light, a pen with a USB stick, a desk fan, a heated mug or a light-up trade show gadget are electrical equipment in every sense. Cables under 250 volts and spare parts are covered too.
Excluded, among others, are military and space equipment, large-scale stationary industrial tools and large-scale fixed installations, means of transport (except non-type-approved two-wheel electric vehicles), non-road mobile machinery for professional use only, photovoltaic panels installed by professionals and research equipment supplied only business to business.
The ten restricted substances and their limits
Limits are measured by weight in each homogeneous material, not in the product as a whole. A homogeneous material is one that cannot be separated into different materials by mechanical actions such as unscrewing, cutting, crushing or grinding: the paint on a housing, the plastic of a cable, the alloy of a solder joint. These are the Annex II thresholds.
- Lead: 0.1% by weight, equal to 1,000 parts per million
- Mercury: 0.1% by weight
- Cadmium: 0.01% by weight, equal to 100 parts per million, ten times stricter than the others
- Hexavalent chromium, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE): 0.1% each
- Phthalates DEHP, BBP, DBP and DIBP: 0.1% each, mandatory from 22 July 2019 (from 22 July 2021 for medical devices and control instruments)
Where do they hide in practice? Lead in solder alloys and some brasses, cadmium in pigments and coatings, hexavalent chromium in metal surface treatments, brominated flame retardants in housing plastics, phthalates in the soft PVC of cables and sheaths.
Exemptions and special cases
Annex III lists exempted applications for which there is no technical alternative today, each with a scope and an expiry date: for example mercury in some fluorescent lamps or lead in certain alloys and ceramic components. Annex IV holds the exemptions reserved for medical devices and control instruments. The lists change often through delegated directives, so an exemption must always be checked in the current version.
Two rules worth remembering. The phthalate limits do not apply to cables and spare parts for equipment placed on the market before 22 July 2019. For electric toys, the RoHS limit on DEHP, BBP and DBP does not apply because the REACH restriction in Annex XVII entry 51 already does: for chemicals in other articles, RoHS does not replace REACH, it adds to it.
Obligations of importers
The decree defines an importer as anyone established in the Union who places on the EU market equipment coming from a third country. Whether the item is sold or given away makes no difference: even a gadget handed out free in the course of a business activity is made available on the market. The obligations in Article 9 are precise.
Before placing the product on the market, the importer must make sure that the manufacturer has carried out the conformity assessment (internal production control, module A), has drawn up the technical documentation, that the product bears the CE marking with the required documents and that it carries a type, batch or serial number and the manufacturer's details. If it has reason to believe the product does not comply, it does not place it on the market and informs the manufacturer and the authorities.
On the equipment, or where that is not possible on the packaging or in an accompanying document, the importer shows its name or registered trade mark and a contact address. It keeps a register of non-compliant products and recalls, informs distributors and, if it discovers a problem after sale, takes immediate corrective action, withdrawal or recall. Finally it keeps a copy of the EU declaration of conformity for ten years and must be able to provide the technical documentation to the authority on request, in Italian.
Declaration of conformity and technical documentation
The EU declaration of conformity is the document in which the manufacturer takes responsibility for meeting RoHS. It follows the Annex VI model: unique product identification, name and address of the manufacturer, reference to Directive 2011/65/EU, standards applied, date and signature. In Italy it must be written in Italian.
The technical documentation gathers the evidence: bill of materials and components, declarations from parts suppliers, test reports where the risk calls for them. The reference harmonised standard is EN IEC 63000:2018, which under Implementing Decision (EU) 2020/659 replaced EN 50581:2012, withdrawn from 18 November 2021. A declaration still citing the old standard is a warning sign: it is worth asking for an updated one.
Controls and penalties in Italy
Market surveillance lies with the ministries responsible for business, environment and health, supported by the Chambers of Commerce, the Guardia di Finanza, ISPRA and the Istituto Superiore di Sanità. At the external borders, checks are carried out by the Customs and Monopolies Agency. Checks are documentary and, where needed, physical and laboratory tests on samples. Article 21 of the decree sets the administrative fines, unless the act is a criminal offence.
- Placing non-compliant equipment on the market: 50,000 to 100,000 euros
- Product without technical documentation: 5,000 to 50,000 euros
- Product without CE marking: 5,000 to 50,000 euros
- Importer failing to show name and address or to take corrective action: 5,000 to 30,000 euros
On top of these come the cost of withdrawal or recall and the seizure of the goods, which for a batch meant for an event or a campaign can weigh more than the fine.
Worked example: 3,000 USB gadgets from China
A hypothetical example. A company in Padua orders 3,000 LED desk lamps with a USB cable in China, to give to customers with its logo. The product is category 11 electrical equipment and the company, bringing it in from outside the EU, is the importer even though it does not sell it.
Before production it asks the supplier for the EU declaration of conformity to Directive 2011/65/EU, citing EN IEC 63000:2018, and the bill of materials. It identifies the parts at risk: the solder alloy on the board (lead), the PVC of the cable (phthalates), the paint on the metal arm (hexavalent chromium, cadmium in pigments). For these it asks for test reports from an independent laboratory on the same model, not on a similar item. It has the importer's name and address and a batch code printed on the carton and on the lamp. On arrival it takes a few sample pieces for X-ray fluorescence screening, which measures total lead, cadmium, mercury, chromium and bromine in a few minutes. It files everything with the date of placing on the market: the file must be kept until 2036.
In short: the checklist
The checks to run before every order of electrical or electronic products, in order.
- Work out whether the product depends on current for at least one function: if so, it almost always falls under RoHS
- Ask the supplier for the EU declaration of conformity in Italian and technical documentation under EN IEC 63000:2018
- Identify the homogeneous materials at risk and ask for test reports on the model ordered
- Check the CE marking, batch code and manufacturer's details, and add the importer's name and address
- Keep the declaration and evidence for ten years and maintain the register of non-conformities and recalls
With La Merce, companies importing gadgets and promotional items with LEDs, USB or batteries from China receive the RoHS declaration and test reports on the model ordered before production, and the importer's name printed on the product, so the 0.1% and 0.01% thresholds are checked before shipment rather than at customs.
Sources
Independent checks on the figures cited, verified in-house.
- Normattiva — Decreto legislativo 4 marzo 2014, n. 27 (testo vigente)
- legislation.gov.uk — Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment
- Commissione europea — Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS)
- Certifico — Direttiva (UE) 2015/863: modifica all'Allegato II RoHS II
- SGS — New harmonized standard EN IEC 63000:2018 announced by EU Commission
Read related articles
Textile labelling regulation: EU rules, fibre composition and penalties
AQL inspection: how to read the table, inspection levels and acceptance numbers
Food contact materials regulation: rules, declaration of compliance and symbol
GPSR regulation: importer obligations, the responsible person and penalties in Italy
REACH regulation: what it is, importer obligations, restrictions and penalties
Italy labeling requirements: 337,000 Halloween items seized in Brescia
Counterfeit goods seized in Italy: over 5 million items in 2025, toys top the list
How to get CE marking: the steps and the importer's obligations
China's battery plan: parts-per-billion defects by 2030
Transport packaging rules and the PPWR: 40% reusable by 2030
Costume jewellery imported from China: 49,512 items stopped in Genoa
Container inspections: deficiencies in more than one unit in ten
Lithium batteries in containers: thousands travel undeclared
SVHC substances and importer obligations: the list rises to 253 entries
Supplier assessment: only those meeting the highest standards of quality, safety and sustainability
Swiss rail freight: CHF 486 million for Alpine trains until 2035
EU rare earth stockpile: Brussels backs Italy's Porto Marghera hub
EUDR regulation: what it is, who it applies to and what to do by 30 December
International supply agreement: key clauses, governing law and disputes
Electronic consignment note: Italian road checks accept digital data from 9 July 2027
Import price index: Italy up 9.6% in September, driven by energy
China industrial output: +4.8% in October as domestic demand slows
Authorised economic operator (AEO): what it is, requirements, benefits and how to apply
Yuan exchange rate: China raises its FX reserve ratio to 6% to slow the rally
Robot density: Italy at 246 per 10,000 employees, Germany at 469
NNN agreement China: what it covers and how to protect your designs with suppliers
Road freight rates in Italy 2026: +6.4% on contracts, rising even without diesel
JD.com Ceconomy acquisition completed: 59.8% stake for 1,335 million euros
Italy packaging EPR: CONAI rules, 2026 rates and deadlines for importers
Steel imports from Turkey: 5 million euros of rolled steel seized in Naples
Hapag-Lloyd: average freight rate at 1,808 dollars per TEU, up 28% in Q3
Customs fraud on Chinese wind towers: 500,000 euros recovered
Italy industrial production: up 1.2% in September, consumer goods down 3%
Marine cargo insurance: clauses A, B and C and carrier liability limits
Italy road haulage decree: from 24 October the diesel share goes on invoices and contracts
Chinese exports up 35.2% in October, surplus above 1 trillion dollars
Container shipping demand in 2027: growth of 2.5-4%, fleet up 6.8%
China factory gate prices up 5.7% in October, consumer goods flat
Customs value of imported goods: how to calculate it, what to add and what to leave out
Container transhipment: ETS-linked changes in 41 of 86 services, study says
Polyether polyols from China: imports registered, retroactive duties possible
Air cargo market in October: demand up 6%, the shift back to ocean from 2027
China anti dumping EU: Beijing probes European para-aramid
CBAM regulation: how it works, the 50 tonne threshold, certificates and deadlines for importers
Container shipping delays: Asia-Mediterranean services 71% more unstable
Deindustrialization in Europe: Confindustria, BDI and Medef call for safeguards beyond steel
Ocean freight rates 2026: Maersk at 3,287 dollars per container, up 46%
EU Indonesia trade agreement: GSP preferences end on 1 January 2027
T1 transit document: what it is, how EU customs transit works and T1 vs T2
China steel production down 2.9% in nine months, but demand falls faster
Italy trade with China: imports down 12.3% in September
Customs warehouse: what it is, how it works, types and the difference with a VAT warehouse
Italy 2 euro tax on small parcels: the 2027 budget scraps it
Vietnam manufacturing PMI at 52.3 in October, but export orders fall
Commercial invoice for customs: what it must contain and how it differs from a proforma
South Korea exports in October: 115 billion dollars, chips up 259%
Anti dumping duties EU: what they are, how they work and how to calculate them
Italy air cargo in September: Malpensa down 7.9%
China factory activity at 49.3 in October: export orders fall
Packing list meaning: contents, how to fill it in and an example
EU tariffs on Chinese goods: safeguards now extend to furniture
Container ship orderbook at 46.5% of the fleet, the highest since 2009
Letter of credit meaning: how it works, types, costs and documents
Canton Fair phase 3: toys, fashion and stationery from 31 October
Parcels from China: e-commerce air volumes to the EU halved in September
Bill of lading meaning: how it works, types and the electronic B/L
China trade secrets law: Beijing drafts six measures against foreign firms
China port throughput: containers up 4.5% in nine months, Shanghai sets a September record
MOQ meaning: what minimum order quantity is and how to negotiate it
Canton Fair phase 2 opens: home goods and gifts, 23 to 27 October
Italy small parcel tax: postponed again to 1 January 2027
LCL vs FCL from China: thresholds, transit times and risks
China five-year plan: 22 tasks for core components and materials by 2030
Suez Canal shipping route: 70% of Asia-Mediterranean capacity is back
Private label meaning: how it works, advantages and risks for importers
China electronics manufacturing up 15.8% in nine months, profits doubled
China to Europe shipping time: sea, rail and air door to door to Italy
Supplier payment terms in Italy: only 42.3% paid on time, and 30.5% rely on one customer
Port of Trieste: containers up 22.3% in the third quarter, but trains down 14%
Import VAT EU: taxable base, deferral, deduction and VAT ceiling in Italy
Dual-use export controls: China requires licences for tunnel boring machines and drone parts from 18 November
China GDP growth 2026: 4.5% in the third quarter, consumption stuck at 1.1%
Preferential and non preferential certificate of origin: differences, EUR.1 and chamber of commerce
Chinese battery storage: output up 110% to over 420 GWh in six months
Port of Rotterdam container throughput: full imports up 8.9%, transhipment down 20%
TARIC code lookup: the 10 digits, the EU database and Binding Tariff Information
EU safeguard measures: Chinese chemicals and machinery targeted after the summit
Ocean freight rates rebound: Shanghai-Genoa up 7% after 13 weeks of decline
Customs clearance in Italy for goods from China: how it works, the documents and the customs entry
China export controls: 14 technologies to be banned in AI, biotech and solar
EU ETS shipping: carriers buy almost 20% of EU allowances
How to find reliable suppliers in China: five channels and how to spot a real factory
Canton Fair 2026 opens with 32,000 exhibitors, running until 4 November
China rare earth exports: 4,270 tonnes in September, faster EU licences
EORI number Italy: what it is, how to get one and how to check it before your first import
China trade surplus: exports up 36.3% in September, surplus with the EU at 34.8 billion
China producer prices up 5% in September, the fastest since 2022
Import duty from China to EU: how to calculate it, with a worked example
Container ship delays: only 4% on time from Asia to Europe in September
China export tax rebate: electric vehicles cut to 9% from 2027, e-cigarettes out
EU China trade deal: fewer hybrids and lower tariffs on €4 billion
Critical raw materials strategic projects: the EU picks 46, five in Italy
Container cost from China to Europe: every cost item and a worked example
Trademark registration grant: Italy's Marchi+ 2026 refunds up to 9,000 euros per trademark abroad
World trade forecast: WTO raises 2026 goods growth to 3.9%
How to import from China to Europe: a step-by-step guide for businesses
After Golden Week: what to expect from Chinese factories and shipping
Truck stoppage in Calabria and Sicily: deliveries at risk from 9 to 20 October
Sourcing by Italian SMEs: 86% domestic, but non-EU rises to 22%
Air cargo in September: demand +6% and ever shorter contracts
Hyper-depreciation or tax credits: what the UPB says about machinery incentives
China's manufacturing PMI at 50.1: factory costs and prices rise
European 301 tool against China: what we know and what we don't
Asia-Europe container rates: twelve weeks of decline, Shanghai-Genoa at 3,702 dollars
Container connectivity at Italian ports: Genoa, Gioia Tauro and La Spezia decline
Digital DeCA in Spain from 5 October: what changes for road freight
Industrial profits in China: +15.7%, but clothing and furniture fall
Extra-EU imports in August: +17.2%, from China +16%
US-China tariffs cut on 30 billion: what changes for buyers in China
Sicily truck stoppage from 16 to 20 October: how to protect deliveries
Industrial robots in China: 354,000 installed in 2025, 59% of the world
Leather excluded from the EUDR: what changes for importers from 7 October
Pinglu Canal: 560 kilometres less to reach the sea
Chinese trucks assembled in Europe: the Steyr plant in Austria
Supply chain risk monitoring: only 20% do it continuously
EU customs reform: what changes now and what in 2028
New Maersk container ships: 26 units delivering from 2029
Italian stone exports: value up, volumes down
Diesel price at 2026 highs: what reaches your deliveries
Suez transits: the return is mostly on voyages back to Asia
European steel protection and the bill for those who transform it
The Italian small parcels tax is postponed to 30 November
China's electronics five-year plan: 30 trillion yuan by 2030
German import VAT reform: less cash tied up at the port
Four Gemini services return to the Suez Canal: what changes for Ligurian ports
Italian exports in the second quarter of 2026: what the +7.9% really says
Digital customs in Norway: with Digitoll, who reports what changes
Italian hyper-depreciation: confirmation due 60 days after approval
China producer prices are rising: what changes for buyers
European preference in public procurement: bids below 50% can be rejected
Congestion at Chinese ports: ten-day waits before Golden Week
WTO barometer: world trade is growing, but containers fall below trend
Fashion imports from China down 8.1%: what the figure says about suppliers
Hyper-amortisation and foreign machinery: the Made in EU rule is dropped
Chinese exports to Europe: just +6.6% while the rest of the world races ahead
Ten-T corridor delays Italy: Confetra's warning on Brenner and Terzo Valico
Panama Canal draft restrictions: Neopanamax cut postponed
Shanghai-Genoa container rates down 10%: what changes for those importing from China
Demurrage and detention charges disputed: Samsung seeks $186 million from CMA CGM at the FMC
Back to Suez: transits up 36% in August, but the route is only halfway there
Steel imports: "melt and pour" traceability starts on 1 October
China-Europe air cargo: the decline stops, what changes for importers
Goodbye to the €150 exemption: the EU parcel duty rewrites the rules of e-commerce imports
Beyond the electric car: China's new export wave of robots, AI and medicines
Steel: EU 50% tariff and new origin rules — what changes for importers
Air freight: when cargo takes flight, every detail counts
Customs checks on electronics imports: how to avoid penalties and optimise compliance
The Bialetti Moka changes hands: one of Italy's most iconic objects becomes Chinese
MSC is about to buy up ports around the world for 23 billion dollars
Import-export of jewellery and precious metals: what Italian law really says
How much does China really export? Figures and opportunities of the trade giant
OEM vs ODM: two key acronyms for creating a product under your own brand
The 5 questions we always ask our suppliers